CAAD.HBT.ETHZ.CH . MAS0607 . MAS0607Calendar

Home | Kursarchiv

Contact | Register | Log On

Caad II | Processing PSZ | DWF Brave Tailor

MAS: Mainpage | MAS06/07 | MAS06/07stu | MAS05/06 | MAS05/06stu | MAS04/05 | MAS04/05stu

caad d-arch

MAS ETH ARCH/CAAD - 2006/07
Master of Advanced Studies in Architecture, Specialization in Computer Aided Architectural Design | 065-0005/6
Supervision: Prof. Dr. Ludger Hovestadt, Philipp Schaerer
Chair of CAAD, ETH Zurich

MAS 2006-07: CALENDAR

Events: ETH: Swiss Federal Institute of Technology Zürich http://www.ethz.ch/news/events/index_EN
Events: ETH-ARCH: Faculty of Architecture: http://www.arch.ethz.ch/darch/index.php

OCTOBER 2006:

DATE	TIME	LOCATION	DESCRIPTION

25.10.2006, Wed	14.00	HIL E 15.1	Intro: Welcome ( Prof. Dr. Ludger Hovestadt, Philipp Schaerer)
	15.00	HIL E 15.1	IT Infrastructre: Accounts, VPN, etc. (Serge Bilgeri, Computer Infrastructure Service, Faculty of Architecture)
	16.00	HIL	Guided Tour Hönggerberg: Infrastructure (Philipp Schaerer, If Ebnöther)
	19.00	Reithalle	Apéro: Restaurant Reithalle, Zürich (Chair of CAAD)
26.10.2006, Thu	10.00	HIL E 15.1	Intro: CAAD Twiki Warm-UP (Philipp Schaerer)
	10.30	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Parametric Design (Steffen Lemmerzahl)
	14.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Adaptive Systems in Spatial Layout Design (Markus Braach)
	16.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Group Thesis 2005-06: bend (Benjamin Dillenburger, Tobias Wendt, Frank Thessling)
27.10.2006, Fri	10.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Group Thesis 2002-03: ESG Pavilion (Pia Fricker, Kai Rüdenauer)
	14.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Group Thesis 2003-04: X-Cube (If Ebnöther)
	16.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Group Thesis 2004-05: M-Any (Arno Schlüter, Tobias Bonwetsch - to be confirmed)

NOVEMBER 2006:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	01.11.2006, Wed	14.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Design with Sheet Metal (Oskar Zieta)
	02.11.2006, Thu	10.00	HIL E 15.1	Presentation Twiki Warm-Up (Philipp Schaerer, Kai Rüdenauer)
MODULE 01		13.30	HIL E 15.1	MAS-Colloquia: Lecture 1: Algorithmic Architecture (Toni Kotnik)
		16.00	HIL E 15.1	Intro: Lecture Series: CAAD Research Field & Projects: Digital Tools in History of Architecture (Susanne Schumacher)
	03.11.2006, Fri	11.00	HIL E 15.1	Module 01: Presentation Assignment 01-1 (Kai Rüdenauer, Benjamin Dillenburger)
		14.00	HIL E 15.1	Module 01: Introduction VectorScript: Basics I (Kai Rüdenauer, Benjamin Dillenburger)
		17.00	HIL E 15.1	Module 01: Introduction Mini-Assignment Basic I (Kai Rüdenauer, Benjamin Dillenburger)

	07.11.2006, Tue	14.00	HIL E 15.1	MAS-Lecture by Ludger Hovestadt
	08.11.2006, Wed	14.00	HIL E 15.1	Module 01: Lecture VectorScript II (Kai Rüdenauer, Benjamin Dillenburger)
		16.00	HIL E 15.1	Module 01: Introduction Mini-Assignment II (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)
	09.11.2006, Thu
	10.11.2006, Fri	10.00	HIL E 15.1	Module 01: Lecture VectorScript: III (Kai Rüdenauer, Benjamin Dillenburger)
		13.30	HIL E 15.1	Module 01: Lecture and Introduction Mini-Assignment III (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)

	15.11.2006, Wed	14.00	HIL E 15.1	Module 01: Lecture VectorScript IV (Kai Rüdenauer, Benjamin Dillenburger)
		16.00	HIL E 15.1	Module 01: Introduction Mini-Assignment IV (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)
	16.11.2006, Thu
	17.11.2006, Fri	10.00	HIL E 15.1	Module 01: Lecture VectorScript V, 3D (Kai Rüdenauer, Benjamin Dillenburger)
		13.30	HIL E 15.1	Module 01: Introduction Final-Assignment IV (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)

	22.11.2006, Wed	10.00	HIL E 15.1	Module 01: Lecture VectorScript VI, 3D "more than extrude" (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)
	22.11.2006, Wed	14.00	HIL E 15.1	Module 01: Presentation Assignment 01-2 (Kai Rüdenauer, Benjamin Dillenburger, Philipp Schaerer)
	23.11.2006 Thu	10.30	HIL E 15.1	Intro: CAAD Research Field & Projects: Serious Game Design (Steffen P. Walz)
	23.11.2006, Thu	14.00	Digitalwerkstatt	Module 01: Introduction: Digitalwerkstatt (If Ebnöther - to be confirmed)
		16.30	HIL E 15.1	MAS-Lecture by Ludger Hovestadt
	24.11.2006, Fri	14.00	HIL E 15.1	Module 01: Refinement

	27.11.2006, Mon			No course - Seminarwoche: http://www.einschreibung.arch.ethz.ch/seminarwoche/showtrips.php
	28.11.2006, Tue			No course - Seminarwoche
	29.11.2006 Wed			No course - Seminarwoche

DECEMBER 2006:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	30.11.2006, Thu			No course - Seminarwoche
	01.12.2006, Fri			No course - Seminarwoche

	04.12.2006, Mon		Digitalwerkstatt	Module 01: CNC-Fabrication
	05.12.2006, Tue		Digitalwerkstatt	Module 01: CNC-Fabrication
	06.12.2006, Wed		Digitalwerkstatt	Module 01: CNC-Fabrication
	07.12.2006, Thu	14.00	HIL E 15.1	Module 01: Final Presentation Module 01 (Prof. Ludger Hovestadt, Kai Rüdenauer, Philipp Schaerer, If Ebnöther) confirmed
		15.30	HIL E 15.1	MAS-Lecture by Ludger Hovestadt
MODULE 02	08.12.2005, Fri	09.00 -12.00	HIL E 15.1	Module 02: Paramteric Facades in Digital Project /Catia (Steffen Lemmerzahl)
				Module 02: Introduction Parametric Design, Main Assignment and Mini Assigment

	11.12.2005, Mon	14.00 -17.00	HIL E 15.1	Module 02: Introduction Digital Project / Catia and Review Mini Assigment (Steffen Lemmerzahl)
	12.12.2005, Tue	10.00 -18.00	HIL E 15.1	Module 02: Concept Studies: Work and Assistance (Steffen Lemmerzahl)
	13.12.2006, Wed	10.00 -18.00	HIL E 15.1	Module 02: Module 02: Work and Assistance (Steffen Lemmerzahl)
	14.12.2006, Thu	10.00 - 11.00	HIL E 15.1	ReDiscussion Modul 1
	15.12.2006, Fri	09.00 -12.00	HIL E 15.1	Module 02: Work and Assistance (Steffen Lemmerzahl)

	18.12.2006, Mon	14.00	HIL E 15.1	Module 02: Design Submission at 2pm - data Transfer to Steffen Lemmerzahl
	19.12.2006, Tue	14.00	HIL E 15.1	Module 02: Start Presentation Documentation
	20.12.2006, Wed		HIL E 15.1	Module 02: Preparing Presentation Documentation
	21.12.2006, Thu	16.00	HIL E 15.1	Final Presentation Module 01 (Prof. Ludger Hovestadt, Steffen Lemmrzahl, Kai Rüdenauer, Philipp Schaerer)
		17.30	HIL E 15.1	MAS-Lecture by Ludger Hovestadt
HOLIDAYS	22.12.2006, Fri	-	-	Christmas Holiday: 22.12.2006 - 10.01.2007

JANUARY 2006:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

MODULE 03	10.01.2007, Wed	14.00	HIL E 65	Module 03: Milling: Introduction (If Ebnöther, David Sekanina, Matthias Bernhard, Philipp Schaerer)
	11.01.2007, Thu	09.00	HIL E 65	Module 03: Introduction Solid Works (David Sekanina)
		13.30	HIL E 65	Module 03: Introduction Surfcam and Precix 3-Axis CNC-Mil (Matthias Bernhard, If Ebnöther)
	12.01.2007, Fri	10.00	HIL E 15.1	Module 03: Warm-Up: Modelling & Milling, Work Session & Design Assistance (Matthias Bernhard, If Ebnöther)
		16.00	HIL E 15.1	Module 03: Warm-Up: Modelling & Milling, Work Session & Design Assistance (Matthias Bernhard, If Ebnöther)
		17.00	HIL E 15.1	Module 03: Introduction Assignment I (David Sekanina, Matthias Bernhard, If Ebnöther)

	15.01.2007, Mon		HIL E 15.1	Module 03: Warm-Up: Modelling & Milling, Work Session & Design Assistance
	16.01.2007, Tue	10:00	HIL E 15.1	Module 03: Review Warm-Up Assignment (David Sekanina, Matthias Bernhard, If Ebnöther)
			HIL E 15.1	Module 03: Introduction Assignment I "Vacuum Formed Light" (David Sekanina, Matthias Bernhard, If Ebnöther)
	17.01.2007, Wed		HIL E 65	Module 03: Assigment I "Vacuum Formed Light" Work Session & Design Assistance
	18.01.2007, Thu		HIL E 65	Module 03: Assigment I "Vacuum Formed Light" Work Session & Design Assistance
	19.01.2007, Fri	14.00	HIL E 15.1	Module 03: Review Assignment I "Vacuum Formed Light" (David Sekanina, Matthias Bernhard, If Ebnöther)
			HIL E 15.1	Module 03: Introduction Assignement II "Flying Carpet"" (David Sekanina, Matthias Bernhard, If Ebnöther)

	22.01.2007, Mon		HIL E 15.1	Module 03: Work Session & Design Assistance
	23.01.2007, Tue		HIL E 15.1	Module 03: Work Session & Design Assistance
	24.01.2007, Wed		HIL E 15.1	Module 03: Work Session & Design Assistance
	25.01.2007, Thu		HIL E 15.1	Module 03: Work Session & Design Assistance
	26.01.2007, Fri		HIL E 15.1	Module 03: Work Session & Design Assistance

	29.01.2007, Mon		HIL E 15.1	Module 03: Work Session & Design Assistance
	30.01.2007, Tue		HIL E 15.1	Module 03: Work Session & Design Assistance
	31.01.2007, Wed		HIL E 15.1	Module 03: Work Session & Design Assistance

FEBRUARY 2007:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	01.02.2007, Thu		HIL E 15.1	Module 03: Final Casting Session
	02.02.2007, Fri		HIL E 15.1	Module 03: Work Session & Design Assistance
	02.02.2007, Fri			CAAD SKI Weekend: 02.-04.02.2007

	05.02.2007, Mon		B 41	Module 03: Review Assignment II "Flying Carpet" (David Sekanina, Matthias Bernhard, If Ebnöther)
			HIL E 15.1	Module 03: Introduction Assignement III "Multi Component Structure" (David Sekanina, Matthias Bernhard, If Ebnöther)
	06.02.2007, Tue		B 41	Module 03: Work Session, Milling
	07.02.2007, Wed		B 41	Module 03: Work Session, Milling
	08.02.2007, Thu		B 41	Module 03: Work Session, Milling
	09.02.2007, Fri		B 41	Module 03: Work Session, Milling
		14.30	HIL E 15.1	MAS Colloquia: Georg Munkel: A* algorithm

	12.02.2007, Mon		B 41	Module 03: Work Session, Milling
	13.02.2007, Tue		B 41	Module 03: Work Session, Milling
	14.02.2007, Wed		B 41	Module 03: Work Session, Milling
	15.02.3007, Thu	14.00	HIL E 15.1	Module 03: Final Presentation Assignment I-III (Ludger Hovestadt, If Ebnöther, David Sekanina, Philipp Schaerer, ...)

Module 04	21.02.2007, Wed	14.00-16.00	HIL E 15.1	Module 04: Introduction Programming and Design
	22.02.2007, Thu	10.00-12.30	HIL E 15.1	Module 04: Introduction Processing (CW)
	22.02.2007, Thu	14.00-16.00	HIL E 15.1	Module 04: Processing Hands-On (selforganized exercise)

	27.02.2007, Tue	10.00-12.30	HIL E 15.1	Module 04: Programming Processing
	27.02.2007, Tue	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
	28.02.2007, Wed	10.00-12.30	HIL E 15.1	Module 04: Designing Software
	28.02.2007, Wed	14.00-16.00	HIL E 15.1	Module 04: Designing Software (Exercise)

MARCH 2007:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	01.03.2007, Thu	10.00-12.30	HIL E 15.1	Module 04: Designing Software (Review)
	01.03.2007, Thu	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
		16.30	HIL E 15.1	MAS Colloquia: Ferdinand Facklam: Swarm systems

	06.03.2007, Tue	10.00-12.30	HIL E 15.1	Module 04: Programming Processing
	06.03.2007, Tue	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
	07.03.2007, Wed	10.00-12.30	HIL E 15.1	Module 04: Designing Software
	07.03.2007, Wed	14.00-16.00	HIL E 15.1	Module 04: Designing Software (Exercise)
	08.03.2007, Thu	10.00-12.30	HIL E 15.1	Module 04: Designing Software (Review)
	08.03.2007, Thu	14.00-16.00	HIL E 15.1	Module 04: Programming Processing

	12.03.2007, Mon	14.30	HIL E 15.1	MAS Colloquia: Tarig Gardizi: L-Systems
	13.03.2007, Tue	10.00-12.30	HIL E 15.1	Module 04: Programming Processing
	13.03.2007, Tue	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
	14.03.2007, Wed	10.00-12.30	HIL E 15.1	Module 04: Designing Software
	14.03.2007, Wed	14.00-16.00	HIL E 15.1	Module 04: Designing Software (Exercise)
	15.03.2007, Thu	10.00-12.30	HIL E 15.1	Module 04: Designing Software (Review)
	15.03.2007, Thu	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
	16.03.2007, Fri	14.30	HIL E 15.1	MAS Colloquia: Seong Ki Lee: Genetic Algorithm

	20.03.2007, Tue	10.00-12.30	HIL E 15.1	Module 04: Programming Processing
	20.03.2007, Tue	14.00-16.00	HIL E 15.1	Module 04: Programming Processing
	21.03.2007, Wed	10.00-12.30	HIL E 15.1	Module 04: Designing Software
	21.03.2007, Wed	14.00-16.00	HIL E 15.1	Module 04: Designing Software (Exercise)
	22.03.2007, Thu	10.00-12.30	HIL E 15.1	Module 04: Final Presentation

	27.03.2007, Tue	14.30	HIL E 15.1	MAS Colloquia: Alexandra Stamou: Cellular automata
	28.03.2007, Wed	14.00	HIL E 15.1	Module 04: Final Presentation
Module 05		15.30	HIL E 15.1	Module 05: Intro, Application Implementation (Karsten, Christoph, Markus)

APRIL 2007:

DATE	TIME	LOCATION	DESCRIPTION

02.04.2007, Mon		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
03.04.2007, Tue		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
04.04.2007, Wed	14.00	HIL E 15.1	Module 05: Short Presentation: Concept (L. Hovestadt, Markus B., Philipp Schaerer)
05.04.2007, Thu		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
06.04.2007, Fri			No Course: Easter - Goodfriday

09.04.2007, Mon		HIL E 15.1	No Course: Easter Monday
10.04.2007, Tue		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
11.04.2007, Wed		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
12.04.2007, Thu		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
13.04.2007, Fri		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance
	14.30	HIL E 15.1	MAS Colloquia: Varuna Saini: Voronoi diagram
	16.00	HIL E 15.1	MAS Colloquia: Abel Moran Blancas: Shape Grammar

16.04.2007, Mon		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
17.04.2007, Tue		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
18.04.2007, Wed		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
19.04.2007, Thu		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
20.04.2007, Fri		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance
	13.30	HIL E 15.1	MAS-Colloquia: Lecture 2: vector geometry (Toni Kotnik)

23.04.2007, Mon		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
24.04.2007, Tue		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
25.04.2007, Wed		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
26.04.2007, Thu		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Markus B.)
27.04.2007, Fri		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance

30.04.2007, Mon		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)

MAY 2007:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	01.05.2007, Tue		HIL E 15.1	No course
	02.05.2007, Wed		HIL E 15.1	Module 05: Application Implementation: Work Session & Design Assistance (Christoph W.)
	03.05.2007, Thu		HIL E 15.1	Module 05: Final Presentation

Module 06	09.05.2007, Wed		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
	10.05.2007, Thu		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
	11.05.2007, Fri	10:00	HIL E 15.1	Module 06: DYNAMO ZH CH

	14.05.2007, Mon			No courses: Seminar Week
	15.05.2007, Tue			No courses: Seminar Week
	16.05.2007, Wed			No courses: Seminar Week
	17.05.2007, Thu			No courses: Seminar Week
	18.05.2007, Fri			No courses: Seminar Week

	21.05.2007, Mon	9:00	HIL E 15.1	Module 06: Produktion : SCHOOP : Baden, Daetwill, CH, Ref. Matthias Bulloni
	22.05.2007, Tue	9:00	HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
	23.05.2007, Wed	7:00	HIL E 15.1	Module 06: Trumpf, Baar CH, Ref. Enrico Wyss, Rolf Lattmann
	24.05.2007, Thu	9:00	HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
	25.05.2007, Fri	9:00	HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)

	30.05.2007, Wed		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
	31.05.2007, Thu	10.00	HIL E 15.1	MAS-Colloquia: Lecture 3: NURBS geometry (Toni Kotnik)
			HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)

JUNE 2007:

DATE	TIME	LOCATION	DESCRIPTION

01.06.2007, Fri		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)

06.06.2007, Wed	8:00	HIL E 15.1	Module 06: Trumpf, Baar CH, Ref. Enrico Wyss, Rolf Lattmann
07.06.2007, Thu	10.00	HIL E 15.1	Lecture: "Hand-Werkzeug-Technik, Machinen-Werkzeug-Techhnik und Informations-Werkzeug-Technik" (Christoph Schindler)
07.06.2007, Thu	14.00	HIL E 15.1	Thesis Introduction: Organization, Planning and Examples (Philipp Schaerer)
08.06.2007, Fri		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)

13.06.2007, Wed		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
14.06.2007, Thu		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
15.06.2007, Fri		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)

18.06.2007, Mon	8:00	HIL E 15.1	Module 06: Trumpf, Baar CH, Ref. Enrico Wyss, Rolf Lattmann
19.06.2007, Tue		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
20.06.2007, Wed		HIL E 15.1	Module 06: CNC & Sheet Metal (Oskar Zieta)
21.06.2007, Thu	14:00	HIL E 15.1	Module 06: Final Presentation
22.06.2007, Fri		HIL E 15.1	Thesis Development

25.06.2007, Mon		HIL E 15.1	Thesis Development
26.06.2007, Tue		HIL E 15.1	Thesis Development
27.06.2007, Wed	14.00	HIL E 15.1	Lecture: CAAD and Kees Christiansen (Alexander Lehnerer)
28.06.2007, Thu	14.00	HIL E 15.1	Thesis Presentation: 1. Abstract - Proposal
29.06.2007, Fri			No courses - MAS CAAD Holidays

JULY 2007:

DATE	TIME	LOCATION	DESCRIPTION

04.07.2007, Wed			No courses - MAS CAAD Holidays
05.07.2007, Thu			No courses - MAS CAAD Holidays
06.07.2007, Fri			No courses - MAS CAAD Holidays

11.07.2007, Wed			No courses - MAS CAAD Holidays
12.07.2007, Thu			No courses - MAS CAAD Holidays
13.07.2007, Fri			No courses - MAS CAAD Holidays

18.07.2007, Wed	14.00	HIL E 15.1	Thesis Presentation: Final Abstract
12.07.2007, Thu			Thesis Development
13.07.2007, Fri			Thesis Development

AUGUST 2007:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

SEPTEMBER 2007:

MODULE	DATE	TIME	LOCATION	DESCRIPTION

	21.09.2007, Wed			Thesis Submission

-- PhilippSchaerer - 10 Sep 2006

Revision r43 - 07 Jun 2007 - 11:52 - PhilippSchaerer Parents: WebHome

This website has been archived and is no longer maintained.