Examples - Modules
Modules and Sensors
This section contains modules that can b e easily plugged into your application.
That means, just get one of these sensors, follow the cables and copy/paste our
code. All modules are tested with Wiring, but should also work on Arduino-boards.
Life can be so easy!
Modules
|
|
2009-01-22: Supersonic SRF05
This Module can be used to plug several Supersonic SRF05 sensors into your project. Connect your sensors to any digital pin on your board. ...>>
|
|
|
|
|
2009-01-20: Ambient Light
This Example shows the use of an ambient light sensor. Connect the sensor to an analog pin. ...>>
|
|
|
|
|
2009-01-20: PIR Motion Sensor SE-90
This Module can be used to plug several Motion-Sensors into your project. Connect your sensors to any digital pin on your board. ...>>
|
|
|
|
|
2008-10-28: Infrared
This Example shows the use of Infrared. ...>>
|
|
|
|
|
2008-10-28: Buttons
This Example shows the use of Buttons. ...>>
|
|
|
|
|
2008-10-28: Potis
This Example shows the use of Potis. ...>>
|
|
|
|
|
2008-10-28: Compass
This Example shows the use of a Compass. ...>>
|
|
|
|
|
2008-10-28: Piezo
This Example shows the use of a Piezo Sensor. ...>>
|
|
|
|
|
20-01-2009: Real Time Clock Module
This Module can be used to plug a Real Time Clock into your project. Connect the clock to your I2C-Pins (SCL, SDA) ...>>
|
|
|
|
|
18-05-2009: uDrive Micro SD Reader/Writer using Fat16
This Module can be used to plug a uDrive Micro SD card reader and writer directly into your project. All data will be stored using Fat16 and can be read directly from your pc or mac! ...>>
|
|
|
|
|
15-01-2009: Nokia LCD SGD-A
This Module shows the use of a Nokia LCD SGD-A. The Nokia LCD display has several additinal futures, build in speaker, RAM and EEPROM. ...>>
|
|
|
|
|
14-09-2012: Barometric Pressure Sensor - BMP085
This is a breakout board for the Bosch BMP085 barometric pressure sensor. The BMP085 offers a measuring range of 300 to 1100 hPa with an accuracy down to 0.03 hPa in ultra-high resolution mode. ...>>
|
|
|
|
|
02-02-2009: Pressure Sensor SCP1000
This Module can be used to plug a Pressure Sensor SCP1000 into your project. Connect your sensors to any digital pin on your board. ...>>
|
|
|
|
|
02-02-2009: Acceleration Sensor LIS302DL
This Module can be used to plug an Acceleration Sensor LIS302DL into your project. Connect your sensors to I2C-Pins on your Board (Pin 0 and 1 on Wiring-Board). ...>>
|
|
|
